Combined strapping tool for steel strap

Joint forces
Each strapping process consists of two steps. Tensioning and joining.
The HPE-L combines muscle power and pneumatics for both processes. The strap tension of up to 7,000 N is generated pneumatically while joining is done manually.
The HPE-L offers the same advantages as the HKE but expands them by greater user-friendliness and a uniform and high tensioning force thanks to pneumatic drive.
This saves valuable energy when working with flat packages

Technical Data
Kind of drive (tensioning) Pneumatic
Tension force up to 7,000 N
Kind of drive (sealing) Manually
Strap feeding speed 0.15 m/s
0.5 ft/s
Dimensions 360 x 115 x 160 mm (L x W x H)

14.2 x 4.5 x 6.3" (L x W x H)
Weight 5.5 kg
12.1 lb
Air pressure max. 6 bar flow pressure
Air consumption
(during tensioning)
0,36 m³ / min.
12.7 ft³ / min.
Cross-section information currently not available
Handarm vibration < 2.5 m/s²
Noise level 78 dB (A)
Strap/Joint
Type of strap Steel strap
Strap Automatenband
MEGABAND®
Megaflex
Strap width 13, 16, 19 mm
1/2" ; 5/8" ; 3/4"
Strap thickness 0.50 - 0.80 mm (for Automatenband, Megaflex)
0.50 - 0.63 mm (for MEGABAND®)
0.02 - 0.031" (for Automatenband, Megaflex)
0.02 - 0.025" (for MEGABAND®)
Kind of seal Sealless-joint
Sealing strength
(depending on strap quality, strap dimensions)
up to approx. 75% of the strap breaking load
Minimum bearing area
Flat package 150 mm
5.9"
Application
Strapping of flat packages (e.g. palletized goods) for stationary use.
Hotline
+49 2336 808 364

E-Mail
jgeurtz@titan-schwelm.de